Product Description
MPW FA751000XMAM Bottom load Version released to replace Racor 751000VMAM.
The MPW FA1000MAM Bottom-Load Version is engineered as a high-clearance, single-unit solution that flows 180 GPH. It gives you full 1000-series flow while solving tight engine room clearance limits.
Dimensions & Space Savings
-
Flow Capacity: 180 GPH (Single unit configuration).
-
Installed Height: ~17.0 to 17.5 inches, matching the physical height footprint of a standard 900-series filter housing.
-
Service Clearance Needed: 2.0 inches below the unit to drop and swap the internal filter element.
-
Total Vertical Space Envelope: Requires 24.0 inches total overall space (installed unit height + bottom service drop space).
Key Installation Takeaway
Standard top-loading 1000-series units (like a traditional top-load Racor 1000MAM require 10 inches of open headroom directly above the lid to pull the element up, taking up 31 to 32 inches of total overhead space.
The MPW FA1000MAM Bottom-Load Version eliminates that overhead requirement completely. It lets you mount a true 180 GPH unit in spaces with only 24 inches of overall clearance, giving you full 1000-series flow right where a 900-series unit usually goes.
Choose the MPW FA1000MAM if overhead deck beams or tight bulkheads prevent pulling standard filter cartridges from the top; skip it if your engine room already has over 32 inches of open vertical clearance above the mounting point.
Racor 1000VMAM Fuel Filter for Marine application.
MPW offers a replacement unit (MPW 751000XMAM) that will work with the original RACOR element, MPW element or a spin-on Donaldson or MANN-Hummel filter.
Racor is ABS approved only if it is mounted directly on the engine or with a Fire Surpresant System
The all new design adds ports, is less restrictive, and improves water separation.
Larger ports decrease restriction, and two (2) inlet and two (2) outlet ports, allow installation in any configuration required to meet fuel delivery needs.
A Shut-off valve is integrated into each individual unit eliminating the need for up
stream valves in the fuel delivery line.
At the heart of every Turbine unit, a new ® service filter featuring the Aquabloc® Synergy media has been created.
The new service filters are designed for the new assemblies. They are backward compatible with previous assembly models.
- Top load drop in filter
- Integrated shut off and slector valve
- Integrated vacuum port
- Larger port size, two inlets and two outlets 1-5/16 inch
- New Turbine seperator design